1064nm Nd:YAG q-switched nanosecond/picosecond laser

Your Position: Home » Products » 1064nm Nd:YAG q-switched nanosecond/picosecond laser
1064nm Nd:YAG q-switched nanosecond/picosecond laser
Download product PDF 

1064nm laser is one of the most common laser among ULaser’s products of solid state laser. Unlike other lasers, 1064nm laser beam is directly emitted from the Nd:YAG crystal. Q-switched crystal helps our laser to emit picosecond output light beam. Either the one with single longitudinal mode or the one with fundamental mode can be chosen in ULaser.

ULaser provides absolute high quality 1064 nm laser. Our 1064nm laser contains high average power, up to 100mW. And it has high pulse repetition frequency, up to 50kHz. At the same time, our 1064nm laser has smaller size and lower power consumption by microchip laser technology.

Our 1064nm laser can be used in most military, civil and scientific research fields. In industry, it can be used in micromachining. In cosmetology, it can be used in picosecond laser tattoo removal machine. Besides, it can also be used in laser ultrasound, laser induced breakdown spectroscopy, etc.

Main features Application
  • Pulse energy up to 200 μJ
  • Pulse width up to 300ps
  • Beam mode is TEM00
  • Fully sealed design, high reliability
  • Maximum repetition rate up to 50kHz
  • Lidar
  • Seed source
  • Laser processing
  • Laser-induced fluorescence
  • Nonlinear optical measurement

1064nm MA Model and Parameter

ModelUL1064-1kHz-120μJ-MA015UL1064-2.5kHz-110μJ-MA016UL1064-2.5kHz-180μJ-MA017UL1064-5kHz-60μJ-MA018UL1064-10kHz-40μJ-MA010UL1064-20kHz-20μJ-MA020
Wavelength(nm)1064
Repetition frequency (KHz)12.5*2.5*51020
Average power(mW)120300500300400400
Output energy(uJ)120110180604020
Pulse width (ps)200020001500
Power stability (8h)±3%
Beam modeTEM00
Full-angle divergence angle Typ. (Mrad) level @ 1/e28≤3≤3
8
Vertical @ 1 / e28≤3≤38
Polarization characteristics＞100:1
Power input100-240 VAC,50/60Hz
Control interface RS232、USB
System power consumption（W）≤35≤20≤25≤35≤35≤35
Power supply size (W × H × L, mm)168×88×14090×32.6×120
90×32.6×120168×88×140
Laser head size (W × H × L, mm)45×30×120
Working temperature (℃)15-35
Storage temperature (℃)0-60
1.*The light outlet of the laser head is side outlet. See the mechanical dimension drawing for details
2.Customized internal beam expansion function to meet the requirements of small divergence angle (less than 2mrad)
3. MA016, and MA017 are specially designed for miniaturized weather radar applications. They are small in size, low in power consumption, and can be used in high altitudes, large temperature differences, and other subserve environments. This series accepts dual wavelength laser customization, such as 1064nm&532nm, 1064nm&355nm, or others.
1064nm MA Microchip laser system PDF

1064nm MC Model and Parameter

ModelUL1064-1kHz-100μJ-MC010UL1064-5kHz-60μJ-MC011UL1064-10kHz-30μJ-MC012
Wavelength(nm)1064
Repetition frequency (KHz)1510
Average power(mW)100300300
Output energy(μJ)1006030
Pulse width (ps)750
Power stability (8h)±3%
Beam modeTEM00
Full-angle divergence angle Typ. (Mrad) level @ 1/e2812
Vertical @ 1 / e2812
Polarization characteristics＞100:1
System power consumption（W）≤25≤20≤30
Power input100-240 VAC,50/60Hz
Control interface RS232、USB #colspan# #colspan#
Power supply size (W × H × L, mm)168×88×140
Laser head size (W × H × L, mm)45×30×120
Working temperature (℃)15-35
Storage temperature (℃)0-60
1064nm MC Microchip laser system PDF

1064nm MD Model and Parameter

ModelUL1064-0.01kHz-300μJ-MD004UL1064-0.01kHz-300μJ-MD005UL1064-0.01kHz-300μJ-MD006UL1064-0.1kHz-100μJ-MD007
Wavelength(nm)1064106410641064
Repetition frequency (KHz)0.10.010.010.1
Average power(mW)1033/310
Output energy(uJ)100300300/300100
Pulse width (ps)350350500/2000350
Power stability (8h)±3%±3%±3%±3%
Beam modeTEM00TEM00TEM00TEM00
Full-angle divergence angle Typ. (Mrad) level @ 1/e21266-412
Vertical @ 1 / e21266-412
Polarization characteristicsP-polarization, ＞100:1P-polarization, ＞100:1500ps P-polarization, >100:1
2ns S-polarization, >100:1		P-polarization, ＞100:1
System power consumption（W）≤25≤10≤10≤25
Power input100-240 VAC,50/60Hz12V 2A12V 2A100-240 VAC,50/60Hz
Control interface RS232、USBSMASMARS232、USB
Power supply size (W × H × L, mm)168×88×14068×35×120100×23×100168×88×140
Laser head size (W × H × L, mm)45×30×12045×30×120145×70×4645×30×120
Working temperature (℃)15-3515-3515-3515-35
Storage temperature (℃)0-600-600-600-60
1064nm MD Microchip laser system PDF
1.*The light outlet of the laser head is side outlet. See the mechanical dimension drawing for details
2.Customized internal beam expansion function to meet the requirements of small divergence angle (less than 2mrad)

1064nm MH Model and Parameter

ModelUL1064-20kHz-3μJ-MH003UL1064-100kHz-1μJ-MH004
Wavelength(nm)1064
Repetition frequency (KHz)20100
Average power(mW)60100
Output energy(uJ)31
Pulse width (ps)350500
Power stability (8h)±3%
Beam modeTEM00
Full-angle divergence angle Typ. (Mrad) level @ 1/e22530
Vertical @ 1 / e22530
Polarization characteristics＞100:1
System power consumption（W）≤35≤40
Power input100-240 VAC,50/60Hz
Control interface RS232、USB
Power supply size (W × H × L, mm)168×88×140
Laser head size (W × H × L, mm)45×33×120
Working temperature (℃)15-35
Storage temperature (℃)0-60
1. Other frequencies can be customized
1064nm MH Microchip laser system PDF

1064nm MO Model and Parameter

ModelUL1064-200Hz-60/50μJ-MO004
Wavelength(nm)1064
Repetition frequency (Hz)1-200
Maximum output energy of space beam (μJ)60
Fiber Coupling Maximum Output Energy (μJ)50
Pulse width (ns)≤1
Energy Stability(rms)≤3%
Energy Regulation Step Accuracy≤1%
Beam mode (spatial beam output)TEM00
Full-angle divergence angle Typ. (Mrad) level @ 1/e2≤2
Full-angle divergence angle Typ. (Mrad)Vertical @ 1 / e2≤2
Polarization characteristics ≥100:1
Fiber parameters (fiber coupled output optional)200μm/0.22NA
Power input24V DC
Modulation inputTTL0-5V,SMB connector
Control interfaceRS232
System Peak Power Consumption (W)＜20
System Average Power Consumption (W)＜10
Laser head size (W × H × L, mm)82×102.8×240
(space)/ 82x79x250(optical fiber)
Working temperature (℃)15-35
Storage temperature (℃)0-60
1. The supported operating frequency is 16~200Hz in continuous mode and burst mode.
2. Fiber core diameter: 200μm.
3. The power supply adapter is shipped with matching power supply, which can support 90~260VAC power supply input.
1064nm MO Microchip laser system PDF

UL-500μJ-5KHz-AMRL001 parameters

Aerosol-detection-radar-light-source

AMRL-001 Series Solid state laser for atmospheric particulate matter lidar

ParameterData
ModelUL-500μJ-5KHz-AMRL001
Energy@1064nm≥500μJ@25℃
Energy@532nma≥500μJ@25℃
Average output power2.5 W @ 5 KHz
Power stability≤ 2 % @ 25℃ @ 8h
Pulse width<15ns, Type.13ns
Beam quality M2<1.3
Repetition frequency3-7KHz Adjustable Default 5KHz
Full angle of beam divergence<3mrad <150μrad @ Full angle @ Beam expansion ×15
Spot diameter<600μm
Polarization ratio>100:1
Beam directivity≤50μrad @ 25℃
Synchronous output signal3.3V~5V @ 50Ω TTL signal，Width≥1μs，Rising edge≤50ns，Jitter<2ns
Communication interface4PM terminal ，RS232 communication protocol
Cooling modeTEC refrigeration, radiator and fan
Power supply24V DC
Laser Head Sizeb250mm×240mm×105mm
Power wastecNormal temperature：90W；
High temperature：200W
Total weight7Kg
Laser lifetime> 8500h
Working temperatured-10~+60℃
Storage temperature-20~+70℃
Relative humidity0~80%
a. The output index and shape of 1064nm and 532nm lasers are the same, and they are two lasers of the same model.
b. This laser is convenient for customers. Except for the four laser modules (laser head module, LD pump source module, Q-switch module and circuit control module), it cannot be changed. The layout of other parts of the laser can be adjusted according to customer requirements.
c. The laser cooling fan is adaptive. The power consumption of low-speed operation at room temperature is about 90W, and that of high-speed operation at high temperature is about 200W.
d. Under high temperature, the laser can work normally, but the output energy will be reduced.

UL-1.2mJ-10KHz-AMRL002 parameters

Atmospheric-sounding-radar-laser

AMRL-002 series Active Q-switched sub nanosecond lasers for atmospheric detection radar

ParameterData
ModelUL-1.2mJ-10KHz-AMRL002
Wavelength1064nm, 532nm coaxial output
Energy＞1.2mJ@1064nm；
＞0.6mJ@532nm;
Fundamental frequency light width＜0.12nm
Laser energy stability（ RMS@2h )≤ 2.5 % @ 25℃ @ 532nm
Pulse width≤1.5ns@10kHz
Beam quality M2<1.8
Repetition frequency10KHz
Full angle of beam divergence5~6 mrad
Polarization ratio>100:1
Beam directivity≤±30μrad
Q-switch triggered synchronous outputPositive Pulse
3~ 5V@50 ΩTTL
Rise Edge Time < 25ns
Pulse Width Range 200ns~10μs
Synchronization trigger signal and output laser jitter <3.0ns
Control modeUpper computer and communication command control
Communication interfaceRS232 communication protocol
Cooling modeWater-cooling
Power supply28±5VDC
The output energy is adjustable in gradesIt is divided into two files and can be set online by software.
High grade works at full power.
Low grade for light path debugging.
Low energy is about 1% of high energy.
High and low laser beam offset angle is less than 0.05 mrad.
Laser system componentsLaser Head+Power Supply+Water Cooler
Laser lifetime> 8500h
Working temperature0~+40℃
Storage temperature-10~+50℃，Low temperature storage requires cooling water removal
Relative humidity0~80%
Vibration requirementsVibration of highway transportation

UL-50mW-1064nm-AMRL004 parameters

Wind-measuring-radar-laser

AMRL004 series frequency stabilized phase-locked laser for wind lidar

ParameterData
ModelUL-50mW-1064nm-AMRL004
Wavelength1064.4nm
Output light power＞50mW
Working modeCW
Line width＜2MHz
Frequency stability (RMS)< 1MHz @ 24 h @ 3℃ Temperature difference
Power stability (RMS)≤1%@ 25℃
Repeated locking error＜100MHz
Relative intensity noise＜-140@10MHz
Frequency stabilization rangeIodine molecule 1104-1110 absorption line
Lock positionMidpoint of absorption line
Frequency shift range (optional)±5GHz
Lock-in accuracy (optional)2MHz
Output modeOptical fiber output, FC/APC
Communication interfaceRS422 communication protocol
Power supply220V AC
Size3.5u chassis
Wrking temperature15～30℃
Storage temperature0～50℃
Relative humidity0～60%

UL-AQNL-DW-1200 parameters

UL-AQNL-DW-1200 active Q switched subnanosecond laser

UL-AQNL-DW-1200 active Q-switched subnanosecond laser

ModelUL-AQNL-DW-1200
Optical ParametersWavelength1064nm, 532nm coaxial output
Pulse energy＞1.2mJ@1064nm；＞0.6mJ@532nm;
Fundamental frequency light width＜0.12nm
Pulse width≤1.5ns@10kHz
Repetition frequency10kHz
Beam quality M²＜2
Divergence angle5~6mrad
Laser beam pointing jitter＜0.05mrad (when the laser output is high-grade)
Degree of polarization＞100:1
Laser energy stability (RMS@2h)< 2.5%@room temperature@532nm
Function parameterCommunication InterfaceRS232
Control methodHost computer and communication command control
trigger methodInternal/external trigger, external trigger 3~5V@50ΩTTL level, external trigger input pulse width range 200ns~10μs
Q-switched synchronous trigger pulse signal outputPositive pulse, 3~5V@50ΩTTL level, rising edge time<25ns, pulse width range 200ns~10μs, synchronous trigger signal and output laser jitter
The output energy can be adjusted in different stagesThere are two gears, which can be set online through software. The high gear is for full power operation, and the low gear is used for optical path debugging. The output energy of the low gear is about 1% of the output energy of the high gear. The laser beam deviation angle of the high and low gears is <0.05mrad
Cooling methodWater cooling
Power supply28±5VDC
Laser lifetime (H)> 1 billion times
Laser layoutLaser head + power supply + water cooler
Environmental requirementsOperating temperature0～40℃
Storage temperature-10～50℃, store at low temperature and drain clean water
Relative humidity0～80%
Vibration requirementsRandom vibration of the whole system (with damping pad), road spectrum (GB/T4857.23)

If you are intereted in 1064nm Nd:YAG q-switched nanosecond/picosecond laser, please click the button below to enquire or ask for a samplel.

Inquiry/Sample

Related article(s) with 1064nm Nd:YAG q-switched nanosecond/picosecond laser:

There is no related article with this product, please visit our articles page to find out more.

Related case study with 1064nm Nd:YAG q-switched nanosecond/picosecond laser:

There is no related case study with this product, please visit case study page to find out more.

Related solution(s) with 1064nm Nd:YAG q-switched nanosecond/picosecond laser:

Related video(s) with 1064nm Nd:YAG q-switched nanosecond/picosecond laser:

There is no related video(s), please visitvideos page to find out more.

Scroll to Top